JetComp #8517 2 mil PETG Shrink Film

2mil PETG film is the industry standard for shrink films and is designed for producing the most difficult of shrinks, especially items like trigger spray bottles. 1 hour cure time. PETG is a little more difficult to work with than the PVC films and best shrink results are achieved with boiling water, a hot air or steam tunnel. The film can be shrunk with a hand-held heat gun using careful heat distribution. Highest shrink ratio is the width of the roll. High gloss 2mil PETG is mounted on a stable temporary support for easy transport through your printer. The film is top coated with JetComps proprietary inkjet receptive coating technology for trouble-free printing with any UV, Eco-solvent or Latex printer. Once printed it can be used in the flat as a proof or assembled into a functional sleeve using super glue or JetComps 7200 solvent seaming pen. For Matte finish use Krylon Matte spray.

• Works on all UV, Eco-solvent or Latex printers
• Good barrier for product protection
• High Gloss
• 75%+ Shrink

• Proofing
• All Shrink Sleeve Packaging